Hong Kong | Singapore | Malaysia

HR600

HR600

The Jacobsen HR500 & HR600 have been developed from the ground up as a new generation of adaptable and practical wide area mowers. Delivering productivity on all fronts, the Jacobsen HR500 & HR600 are highly manoeuvrable, engineered for reduced downtime and produce the widest width of cut in their class. The first in a range of wide area mowers, the HR500 and HR600 are designed with high strength steel throughout, reducing overall weight where possible to make best use of their available power. A range of engines, control systems and cutting widths are available to give options for all budgets and working conditions.

 

 

 

 

Centaur Asia Pacific is the distributor for Jacobsen range of products in Hong Kong, Macau, and Singapore.

Updated on: 16 July 2020

Type
Kubota V2403-CR-TE4 4-cyl, liquid cooled, turbo diesel
Rated Horsepower
48.5 kW @ 2700rpm
Emission Level
EU Stage IIIB- (EPA Tier 4 Final)
Cooling System
Side-by-side radiator/hydraulic oil cooler; pressurized; 7.6 l capacity, 8.5 fins per inch
Fuel Capacity
77.1 l
Electrical System
12-volt, input/output controller. 45/60 amp alternator. Overload protection with automotive type fuses.
Traction System
Hydrostatic closed loop parallel cross series SureTrac system; variable displacement piston pump; front high torque fixed displacement piston wheel motors; full time auto 4wd fwd, on demand in reverse.
Deck Drive
Seven individual hydraulic motors with self lubricating integral bearings
Hydraulic System
50.2 l capacity reservoir, O-ring face seal fittings, 10 micron remote charge filters, suction screen at tank, oil cooler side by side radiator, diagnostic test ports.
Front Tires
26 x 12-12 tubeless 8 ply
Rear Tires
20 x 10-8 tubeless 6 ply
Service Brakes
Dynamic through traction system
Parking Brake
Wet parking brakes integrated into wheel motors
Steering
Q-Amp® Variable rate, hydrostatic powered equal displacement cylinder to rear wheels
Number and Size
One 1.52 m (60 in.) front deck; Two 0.9 m (35 in.) or 1.03 m (40 in.) or 1.12 m (44 in.) impact absorbing wing decks
Caster Wheels
Six, 9 x 3.5 - 4. Smooth, semi pneumatic puncture proof, sealed precision ball bearings
Weight Transfer
On demand electrically operated hydraulic weight transfer system
Height of cut
25-120 mm (1 - 4.75 in.) in 6.5mm (0.25 in.) increments; tool-less adjustment
Cutting Capacity
At 12 kph (7.5mph): 3.24 ha/hr (8.0 acres/hr)
3.56 ha/hr (8.8 acres/hr)
3.89 ha/hr (9.6 acres/hr)
Overall Cutting Width
3.0 m (118”) or 3.28 m (129 in.) or 3.48 m (137 in.)
Deck Lift/Lower
Fingertip operated joysticks for individual deck lift/lower; cross cut position; front deck service position with lock pin. Electronic safety locks.
Deck Construction
Bull nose pro le, high strength, low weight steel construction. Solid bumper rails, bolted assembly of all impact and wear parts
Mowing
12 km/h variable
Transport
25 km/h variable
Reverse
6.4 km/h variable
Weight
1769 kg (3900 lbs); 1976 kg (4356 lbs) with cab
Length
3.62 m (143 in ) Front deck down
Height
2.11 m (83 in.) ROPS Up; 1.70 m (67 in.) ROPS & Decks Down; 2.2 m (57 in.) with cab
Transport Width
1.65 m (65 in.) at 50 mm (2 in.) height of cut
Accessories
Road lighting kit, beacon, Tilt Sensor Technology (TST), air suspension seat, puncture resistant tyres, air-conditioned cab