Hong Kong | Singapore | Malaysia

HR700

HR700

The all new HR Series of wide area rotary mowers delivers the next generation of productivity on all fronts. The ultra-durable new SureStrengthTM decks and superior maneuverability make it the ideal mower for sports fields, parks and green spaces, schools, airports, golf courses, and commercial grounds. By utilizing high strength, high performance steel and a compact chassis design, the HR series sets a new industry standard for the most efficient use of power.

  • The HR700TM is the world’s first and only wide area rotary mower with 14 foot cutting width, increasing productivity by up to 25% (up to 2.5 acres/hr more) over traditional 11 foot mowers.
  • Unparalleled nimble platform delivers zero uncut circle for effortless 180 degree turning, leaving no uncut grass and easier mowing around obstacles.
  • New AdaptiCutTM system automatically adjusts mow speed to ensure consistent cut performance even through the thickest grass.
  • Individual hydraulic deck motors with self-lubricating integral bearings deliver reliable cutting power to each blade and require no tensioning or greasing maintenance of belts and pulleys.
  • InCommandTM control system provides on-board diagnostics for quick and easy troubleshooting and displays maintenance
  • Ergonomic cockpit with optimal seating position, wing decks set forward of operator, and armrest located individual lift/lower deck joysticks for superior unobstructed views.
  • Tilt Sensor Technology (TST)TM ensures operator safety by automatically monitoring slope angles and alerting operators when nearing unsafe working conditions.
Type
Kubota® V2403-CR-TE4 4-cyl, liquid cooled, turbo diesel
Horsepower
65.2HP (48.6 kW) @ 2700 rpm
Emission Level
EPA Tier 4 Final - (EU Stage IIIB)
Cooling System
Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt (7.6 L) capacity, 8.5 fins per inch
Fuel Capacity
20.4 gal (77.1 L)
Electrical System
12-volt, input/output controller. 60 amp alternator. Overload protection with automotive type fuses.
Mowing
10 mph (16.4 km/h)
Transport
15.5 mph (25 km/h)
Reverse
4 mph (6.4 km/h)
Traction System
Hydrostatic closed loop parallel cross series SureTrac system; variable displacement piston pump; front high torque fixed displacement piston wheel motors; full time auto 4wd forward, on demand in reverse. Variable displacement, electronically controlled hydrostatic drive.
Deck Drive
Nine individual hydraulic motors with self lubricating integral bearings
Hydraulic System
13.3 gal (50.2 litre) capacity reservoir, O-ring face seal fittings, 10 micron remote charge filters, suction screen at tank,
oil cooler side by side radiator, diagnostic test ports.
Front Tires
26 x 12-12 tubeless 8 ply
Rear Tires
20 x 10-8 tubeless 6 ply
Service Brakes
Dynamic through traction system
Parking Brake
Automatic wet parking brakes integrated into wheel motors
Steering
Q-Amp® Variable rate, hydrostatic powered equal displacement cylinder to rear wheels
Number and Size
One 60 in. (1.52 m) front deck; Two 60 in. wing decks
Caster Wheels
Eight, 4 x 11 in. smooth tires with greasable tapered roller bearings
Weight Transfer
On demand electrically operated hydraulic weight transfer system
Height of cut
1.0 - 4.5 in. (25-114 mm) in 0.5 in. (12.7 mm) increments
Cutting Capacity
Max: 17.0 acres/hour at 10.0 mph (6.9 ha/hr at 16.0 km/h)
Typical: 12.7 acres/hour at 7.5 mph (5.14 ha/hr at 12.0 km/h)
Overall Cutting Width
4.26 m (168 in)
Deck Lift/Lower
Fingertip operated joysticks for individual deck lift/lower; cross cut position; front deck service position with lock pin. Electronic safety locks.
Deck Construction
11 gauge (3 mm) Domex high strength steel shell with 9 gauge (4mm) bolt in baffle and stiffeners
Weight
Standard: 4023 lbs (1825 kg)
Cab Unit: 4479 lbs (2032 kg) with cab
Length
143 in. (3.62 m) front deck down
Height
Standard: 92 in. (2.34 m) decks up, 83 in. (2.11 m) decks down, ROPS up
67 in. (1.70 m) ROPS and decks down
Cab Unit: 92 in. (2.34 m) decks up
87 in. (2.2 m) decks down
Transport Width
65 in. (1.67 m) at 1 in. (25 mm) height of cut