Hong Kong | Singapore | Malaysia



The Jacobsen MH5 tractor-mounted large area reel mower provides a unique, cost-effective alternative to traditional reel mowers. With the ability to mow, verticut or scalp down, the MH5 turns your tractor into a versatile and efficient turf maintenance tool. Achieve excellent ground contour following and productivity with fully floating cutting units and a 135 in. width-of-cut. Each reel is hydraulically driven with enough power and ruggedness to handle even the toughest conditions.

  • Simple design for easy operation and maintenance.
  • Individually hydraulically controlled reels allows operation of three, four or all five reels to maintain tight spaces or provide added power to each reel for especially tough jobs.
  • Maintain peak performance and lower oil temperature in even the hottest of climates with thermally actuated electric fan.
  • Reel drive operates in forward for mowing or reverse for easy backlapping.




Centaur Asia Pacific is the distributor for Jacobsen range of products in Hong Kong, Macau, and Singapore.

Updated on: 16 July 2020

Welded and bolted hollow box section frame; cutting cylinder drive control lever for forward and reverse backlapping
Hydraulic Tank
82 L capacity
Hydraulic Cooling
Oil cooler with thermally actuated electric fan
Lift System
Attaches to tractors with category 1 or 2 three point linkage
Tractor Requirements
Standard 40 mm diameter, 6-spline 540 rpm PTO shaft
Minimum Power
29.2 kW; 36.7 kW recommended
1.11 m
Transport Width
2.50 m
Free Standing: 0.98 m
600 kg
Five 19.8 cm diameter reels with 6 or 8 blades; verticut reels available
Hydraulically driven off of tractor PTO
Width of Cut
3.43 m
Height of Cut
Floating Head: 8 mm to 49 mm
Cutting Performance (area)
4.1 ha/h at 12 km/h
Height of Cut Adjustment
Adjustable screw with height-of-cut indication